- ページ 3

自動車アクセサリー ATTA Freedom FillのPDF インストール手順をオンラインで閲覧またはダウンロードできます。ATTA Freedom Fill 10 ページ。 Auxiliary system
ATTA Freedom Fill にも：トラブルシューティングマニュアル (5 ページ)

ページを印刷する

Examples of 12 volt ignition power sources. (Examples only, due to variations in vehicles, see owner's

2017 Ford – w/ upfitter switches = Brown wire near under hood driver side fuse panel. (To locate wire, reach

down behind the under fuse panel. You should be able to feel a group of blocked of wires. Pull the wires up and

find the solid brown wire).

2017 Ford – w/out Upfitter Switches, #35 (Under Hood fuse panel – Passenger Side)

2015 Chevrolet 2500HD = #30 fuse, SEO, 15 amp (Located on Driver Side Fuse Panel)

2014 Ford F350= #44 Fuse, Auxiliary (Located on the Passenger Side Fuse Panel)

2014 GMC Denali 2500HD= #51 fuse, SEO/ALC (SEO Upfitter Usage)

2011+ Dodge = Fuse #93 – (Located under hood driver's side)

5. Connect the BROWN wire from the Gauge & Switch Console to the BROWN wire on the controller

harness. Connect the PURPLE wire from the Gauge & Switch Console to the PURPLE on the

Controller Harness. Using the supplied POSI-Tap, splice the YELLOW wire from the FTC computer

module harness to the YELLOW wire from the fuel gauge (NOTE: The yellow wire from the fuel gauge

will be routed through the factory fire wall (Step 7).

6. Connect the ORANGE wire from the Gauge & Switch Console to the Factory dimmer switch wire.

This wire is used for the auxiliary gauge light. The wire can be found behind the factory dimmer switch.

It may be necessary to use a test light to determine the proper wire. (See owner's manual)(Use the

supplied splice to tie the orange wire to the factory dimmer switch wire).

Example Dimmer Switch Wire Colors:

11-14 GM/Chevrolet – Brown with White Stripe

GM+ = Yellow

Dodge – Orange with Grey Stripe

Ford- Purple with Gray Stripe

manual.)