- ページ 4

スピーカー DSPPA DSP203NのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。DSPPA DSP203N 4 ページ。 Ip network column speaker
DSPPA DSP203N にも：ユーザーマニュアル (7 ページ)

Installation (Take DSP203N for an Example)

① Assemble the bracket into two parts, A and B.

② Install 3 expansion screws in an appropriate position for installation, and fix A on the expansion screws

with nuts. (Please pay attention to the installation height! It is recommended that the height of the speaker

be 1.8m to 2m high from the ground.)

③ Attach B to the rear panel of the speaker with screws.

④ Connect B attached to the speaker to A fixed on the wall, and tighten the screw to fix it.

⑤ Connect the sub speaker, network cable, power cord, etc. as needed.

⑥ Finally, adjust the angle of the speaker, check whether the speaker is installed firmly, and complete the

installation.

www.dsppatech.com

The specifications will be subject to change without prior notice.