- ページ 6

投影スクリーン DSPro 600705のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。DSPro 600705 8 ページ。 Tab tension

ENGLISH

About the canvas

1. The screen must, as far as possible, be driven up into the cassette when not in use. Make sure that

there are no insects, dust and durt on the canvas when it is rolled up.

2. The current scroll operation must not exceed four minutes. If so, the engine goes off automati-

cally to prevent overheating. After cooling (about 10-15 minutes) the roller function works again.

3. To ensure optimal projection effect, you should be aware of the following:

3.1 Avoid scratching the screen

3.2 Use a clean cloth or soft brush to clean the screen

4. The screen should not be installed in damp rooms.

5. The screen can be cleaned up with a damp cloth.

The screen is suitable for use in home theaters, cinemas, schools, clubs, entertainment, multi-

media training and meeting room etc..

The screen comes with an internal and an external wireless remote control for your choice:

RF remote control (within 100 meters) or Infrared remote control (within 50 meters).

Manual controll

Manual operation:

Press the control unit and stop freely. The screen will stop exactly where you want it to stop, during

ups and downs.

RF remote control operation:

Use the three buttons (Up

Both solutions have time control during ups and downs, and both will stop automatically when the

end point is reached. Both solutions have integrated intelligent power function that automatically

comes into force if the ups and downs operation are going on for more than four minutes. The

canvas will stop running until the engine has cooled down again.

The sliding wall brackets and smart mounting reduces unnecessary problems and lack of space

during installation. After installation, the screen can be used with standard 220V-240V.

Do not turn on the power before the complete installation of the screen is done

, Down

and Stop

CAUTION!

Stop

Down

) on the remote control to operate the screen.

USER INSTRUCTION

RF Remote control