- ページ 8

バッテリーチャージャー DSR Pro SeriesのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。DSR Pro Series 13 ページ。 Jump starter & dc power source
DSR Pro Series にも：取扱説明書 (8 ページ)

ページを印刷する

12. MOVING AND STORAGE INSTRUCTIONS

12.1 Store the charger unplugged, in an

upright position. The cord will still conduct

electricity until it is unplugged from the

outlet.

13. SPECIFICATIONS

Input ................................................................................................230-240V~50 Hz, 2.3A

Output .............................................................................................. 6/12V

Weight ..................................................................................................................... 1.28 kg

Reverse polarity protection ........................................................................................... Yes

Operating temperature .......................................................................................... 0°-40° C

14. TROUBLESHOOTING

PROBLEM

CONNECTED LED

is not on.

CHARGING LED is

blinking.

CHARGED LED

is on, but battery is not

fully charged.

All LEDs are lit in an

erratic manner.

15. DISPOSAL INFORMATION

This product should not be disposed with other household wastes. To prevent possible

harm to the environment or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources. To return your used

device, please use the return and collection systems or contact the retailer where the

product was purchased. They can take this product for environmental safe recycling.

POSSIBLE CAUSE

The battery is not connected

correctly.

Battery voltage is at zero volts.

Charger is in abort mode.

Battery is sulfated.

Battery is bad.

Surface charge voltage is high.

Battery voltage is very low and the

charger detects it as 6V, not 12V.

A button may have been pressed

while the charger was being

plugged in.

12.2 If the charger is moved around the shop or

transported to another location, take care

to avoid/prevent damage to the cords, clips

and charger. Failure to do so could result in

personal injury or property damage.

Check for proper connection to the

battery.

Turn off everything in the car and

try to connect again.

Unplug the charger from the AC

and plug it back in.

Use

hours.

Have the battery checked.

Replace the battery.

Unplug the charger from the AC

and plug it back in.

Unplug the charger from the

AC and plug it back in, without

touching the control board.

•

2A, 10A, 15A

SOLUTION

(Desulfation Mode) for 8