- ページ 5

アクセサリー Attero Tech unDAES-OのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Attero Tech unDAES-O 12 ページ。 4-channel dante to aes/ebu interface

unDAES-O

User Manual

1 – Overview

The unDAES-O is a small, cost-effective Dante to AES3 interface that bridges Dante networked audio, directly to AES3

enabled digital audio equipment, keeping the audio signals in the digital domain in the process. The unDAES-O receives

up to four (4) audio channels from the Dante network and outputs these on two (2) AES3 outputs using XLR connectors.

The small flange-mount form factor and scalability of the unDAES-O solution makes it a great tool for interfacing legacy

digital audio equipment such as power amplifiers, mixing consoles, signal processing gear and broadcast equipment to

Dante networks with ease.

Figure 1 - unDAES-O Front and Rear Panel Views

In addition to the AES3 output connectors, the unDAES-O features two Ethernet connections available on RJ-45s. When

viewed from the rear panel, the left-most RJ-45 connector can used to receive 802.3af-compliant PoE power from a PoE

power sourcing device such as an Ethernet switch or mid-span PoE injector. The unDAES-O also features an internal Gigabit

Ethernet switch allowing for daisy-chain applications to flexibly scale the number of AES3 outputs available from a single

home-run back to the Dante Ethernet switch infrastructure.

Alternatively, the unDAES-O can be powered from an external +24VDC via the barrel jack input or from the PWR LINK

Phoenix-style input connector. The PWR LINK feature is intended to be used with other Attero Tech devices supporting

the PWR LINK connections to supply power between daisy chained devices.

The following diagram shows the signal flow and channel assignment for the AES-3 outputs.

Figure 2 - Signal Flow Diagram

Page 4

614-00024 Rev 02