- ページ 7

アンプ Attero Tech BoomBox NA4のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Attero Tech BoomBox NA4 15 ページ。 4 channel combranet amplifier

2 – Installation

Power LED

Power Socket – Use with optional 12V to 24 V DC wall wart only.

CobraNet Ethernet interface connector and indicators

Speaker outputs

2.1 – Mechanical

The BoomBox should be securely mounted before connecting the electrical connections. If installation is to be in a

rack, use either single or dual rack kits. The rack kit is ordered separately and comes as a separate kit and thus will

need attaching to the BoomBox prior to installation into the rack. The rack kits comprise of rack ears and rack

extension pieces. The dual rack kit also has an additional center spacer plate. All the screws to attach the rack kits are

included though screws to attach the completed rack mountable unit into the rack will be required.

To attach a rack kit, attach the rack ears to the fronts of the unit using the supplied pan-head screws. If using the dual

rack kit, position the two units, right way up and side by side and use the center spacing plate to connect the two units

together using the countersunk screws to form a single mechanical unit. Finally, attach the rack extension pieces to the

outside rack ears.

Figure 2 – BoomBox Connectors and Indicators

Page 3

BoomBox NA4

User Manual

614-00006-02