ページを印刷する
About the Remote Modes
If you have multiple decoders in your home or even in the same room, you need to set the remotes (and
the decoders) to different "modes", so that the commands sent from one remote, won't be picked up by the
other decoder. If you are using two DStv HD Decoders, you will need to set one remote to TV1 mode (to
operate the first decoder) and another remote to TV2 mode (to operate the second decoder).
This remote has three modes and can be set to TV1, TV2 or TV3 mode. The default mode is TV1.
You will see a
green
light blink every time you press a button on the remote control.
green
light blinks below i, the remote is in TV1 mode.
If the
To set the remote to TV1 mode: press and hold the i button for 3 seconds or
green
light blink on TV1 (below the i button).
until you see the
A
If the
green
light blinks below B
CK, the remote is in TV2 mode.
A
To set the remote to TV2 mode: press and hold the B
CK button for 3 seconds
A
or until you see the
green
light blink on TV2 (below the B
CK button).
7
DStv Remote (B5 model)