ページを印刷する
- 1. Product Overview
- 2. LNB Requirements
- 3. Connecting the Inputs from Your Satellite Dish
- 4. Twin LNB Connection Diagram (IS20 Only)
- 5. Twin LNB Connection Diagram (E36B Only)
- 6. Quad LNB Connection Diagram
- 7. 3 Cable Quad LNB Connection (E36B Angola and Mozambique Only)
- 8. Quattro LNB Connection
- 9. Connecting the Switch to Your Decoder(S)
- 10. Connecting the Dstv Switch (5-1) to One Dstv Explora
- 11. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (IS20)
- 12. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (E36B Angola and Mozambique Only)
- 13. Connecting the Dstv Switch (5-1) to Two Dstv Exploras (E36B)
- 14. Connecting the Dstv Switch (5-1) to One Dstv Explora and One to Four Single View Decoders
- 15. Connecting the Dstv Switch (5-1) to One Dstv Explora and One 2 Tuner Decoder
- 16. Connecting the Dstv Switch (5-1) to One Dstv Explora and One 4 Tuner HD PVR
Connecting the DStv Switch (5-1) to one DStv Explora
and one 4 Tuner HD PVR
• Once the switch has been connected to the satellite dish,
• Then connect the outputs labelled 1 to 4 on the switch to the
Information correct at time of going to print. For updated information, go to www.dstv.com (the "DStv website").
In the event of conflict between this information and the information on the DStv website, the information on the DStv website will prevail.
e&oe (August 2013, V2.7)
12
H/L
V/L
H/H
1
2
3
use the supplied cable and connect output A or B on the
switch to the input labelled UNICABLE™ IN on the back of
your DStv Explora.
satellite inputs on the back of the 4 Tuner HD PVR.
V/H
A
DStv Explora
B
4
4 Tuner HD PVR
DStv Switch - User Guide