- ページ 3

タブレット DT Research DT301X-TRのPDF 基本操作マニュアルをオンラインで閲覧またはダウンロードできます。DT Research DT301X-TR 4 ページ。 Rugged gnss tablet

ページを印刷する

OPERATION

Powering ON and OFF

To ac�vate the DT301X-TR, push and quickly release the Power Bu�on. The display will

come on in a few seconds. To put the DT301X-TR in Standby mode, push and quickly

release the Power Bu�on. To turn the DT301X-TR oﬀ for extended storage, power

oﬀ safely using any so�ware func�on that "shuts down computer" provided in the

so�ware opera�ng system.

NOTE:

The ba�ery pack shipped with your tablet may be low in power. Please use

the AC-DC adapter with the DT301X-TR when se�ng up for the ﬁrst �me to

fully charge the ba�ery pack, or use the op�onal ba�ery charger kit.

NOTE:

When the ba�ery pack is charging, the blue-colored Ba�ery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking

ac�vity and the LED stays dark, the ba�ery pack may have been drained

substan�ally. Try unplugging/ replugging the AC-DC adapter to the DT301X-

TR a few �mes to ac�vate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Bu�on to put

the tablet in "Standby" mode while not in use. Pushing brieﬂy on the same

bu�on will wake up the system within seconds.

NOTE:

Avoid using the Power Bu�on ("hold 4+ seconds" feature) to turn oﬀ the

tablet—this form of hardware shutdown is intended to be a means of

recovery from lockups, and not as normal opera�on.

ENGLISH

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed a�er a launch sequence of several seconds. The wireless

LAN connec�on may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT301X-TR may be conﬁgured using the u�li�es and methods dictated by

the so�ware opera�ng system. The DT301X-TR should be conﬁgurable for various

proper�es such as user proﬁles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT301X-TR is o�en delivered with an embedded (user-inaccessible) 802.11ac

WLAN adapter equipped with a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT301X-TR will detect

802.11 access points in the vicinity for you to select the access point of your

choice for connec�on.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT301X-TR and

the access points have to match. The SSID is case-sensi�ve and it is recom-

mended that you enable WEP/WPA/WPA2 encryp�on (or advanced alterna�ves)

for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly conﬁgure

associated se�ngs such as Authen�ca�on mode, etc.

• Refer to the access point opera�ng manuals for se�ng up the 802.11 access

points.

ENGLISH