- ページ 3

タブレット DT Research DT382GLのPDF 基本操作マニュアルをオンラインで閲覧またはダウンロードできます。DT Research DT382GL 4 ページ。 Rugged tablet
DT Research DT382GL にも：基本操作マニュアル (4 ページ)

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Wireless Networking

Wireless LAN

The DT382GL/ DT382GL-TR is often delivered with an embedded (user-inaccessible)

802.11ac LAN adapter equipped with a hidden custom antenna.

•

Through the support of typical WLAN adapters, the DT382GL/ DT382GL-TR should

be able to detect all 802.11 access points in the vicinity for you to select the

access point of your choice for connection.

•

The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT362G and the

access points have to match. The SSID is case-sensitive and it is recommended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives) for

secure access.

•

When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly configure

associated settings such as Authentication mode, etc.

•

Refer to the access point operating manuals for setting up the 802.11 access

points.

Data Capture Module Operation Guide

If your DT382GL/ DT382GL-TR comes with an RFID Reader refer to the steps below to

configure the settings.

UHF RFID Reader:

The optional UHF RFID reader supports EPC Gen2V2 and ISO 18000-63 standard. To

develop an application to use the UHF RFID reader, contact your device provider for a

UHF RFID reader API package

NOTE:

To ensure the system performance, turn on only the symbologies you are going to use.

For More Support

Users can download the Tablet Modules Basic Operation Guides from the DT Research

website.