- ページ 5

タッチターミナル DT Research DT395CRのPDF 基本操作マニュアルをオンラインで閲覧またはダウンロードできます。DT Research DT395CR 10 ページ。 Mobile pos tablet
DT Research DT395CR にも：基本操作マニュアル (4 ページ), 基本操作マニュアル (4 ページ)

ページを印刷する

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a

launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established.

Configuring the DT395CR

The tablet may be configured using the utilities and methods dictated by the software operating system. The

DT395CR should be configurable for various properties such as user profiles, network features, and several

system elements.

Wireless Networking

Wireless LAN

The DT395CR is often delivered with an embedded (user-inaccessible) 802.11ac WLAN adapter equipped with

a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT395CR should be able to detect all 802.11 access

points in the vicinity for you to select the access point of your choice for connection.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT395CR and the access points have to

match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or

advanced alternatives) for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your

networking equipment literature to properly configure associated settings such as Authentication mode,

etc.

• Refer to the access point operating manuals for setting up the 802.11 access points.

Bluetooth

The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility

Center. Follow the instructions and options provided within the application to configure and invoke

Bluetooth connectivity with the corresponding peripherals.

ENGLISH