- ページ 2
タッチターミナル DT Research DT395CRのPDF 基本操作マニュアルをオンラインで閲覧またはダウンロードできます。DT Research DT395CR 4 ページ。 Mobile pos tablet
DT Research DT395CR にも： 基本操作マニュアル (10 ページ), 基本操作マニュアル (4 ページ)
ページを印刷する
DT395CR
The DT395CR
2
1
3
B
C
D
4
5
NOTE:
The DT395CR standard package includes a stand that attaches to the back. When the
stand is attached, the DT395CR will not fit into the Desktop Charging Cradle
(ACC-008-59). If your tablet came with the stand pre-installed, please remove the stand
before using the Desktop Charging Cradle.
2
ENGLISH
A
Battery/Power LED
F
E
6
Input/ Output Ports
Barcode Scanner (optional)
A
B
Headphone Jack
USB Port
C
DC Power Input
D
E
Camera (optional)
F
LAN/ HDMI (optional)
Button Functions
BUTTON
ACTION
Security button.
1
As scanner trigger when equipped with the scanner module
Power on.
Push/release typically enters Standby mode, or Push/release exits Standby mode or
2
restarts (software dependent)
Push and hold (over 4 seconds) invokes hardware shutdown
Wi-Fi switch.
3
Menu button.
4
Up/ down button.
5
To adjust the monitor brightness and the speaker volume
Monitor mode switch.
6
To switch to display the video signal from HDMI port
Battery and Power Management
The DT395CR is equipped with an internal Li-Ion battery pack and an optional battery
pack that clips (hot-pluggable) onto the back of the tablet. The period between battery
recharges can be significantly lengthened by putting the tablet into Standby mode
through the Power Button (see Buttons Function Table) whenever the tablet is not in
use. Depending on the operating software, the DT395CR may also be configured to enter
various power-saving modes via the Power Button or through timed entry.
3
ENGLISH