- ページ 2
タッチターミナル DT Research WebDT 517のPDF 基本操作マニュアルをオンラインで閲覧またはダウンロードできます。DT Research WebDT 517 2 ページ。 Integrated lcd system
ページを印刷するWebDT 515/ 517
Packaging
•
The WebDT 515/ 517 is packaged with recyclable materials
and designed for maximum protection in transportation and
handling.
•
When possible, please save the packaging carton and protective
inserts for re-use if there is ever a need to ship the WebDT 515/
517.
I/O Panels
Side I/O Panel
The WebDT 515/ 517 has two (2) USB 2.0 ports located and
easily accessible along the left edge of the display unit.
Lower I/O Panel
The WebDT 515/ 517 has a comprehensive set of I/O ports.
The following ports are located along the lower rear edge of
the display unit.
1.
Two (2) USB 2.0 ports
2.
COM ports
3.
Audio-out jack
4.
Microphone-in jack
5.
Line-in jack
6.
Ethernet port (RJ45)
7.
18.5V/ 3.5A DC-in jack
Side Panel Function Buttons
The side panel of the WebDT 515/ 517 features power, and
programmable buttons.
2
ENGLISH
1
2
3 4 5 6 7
8
9
Button
Description
The four buttons are intended to be user programmable via software in
8. Programmable
applicable operating systems.
•
M
ay be configured to perform different functions, depending on the
software operating system.
•
D
epending on the OS, a brief, firm push will trigger software-enabled
entry into Shutdown or Standby modes. Push in similar manner to Restart
9. Power
or to exit Standby mode.
•
P
ush and hold for over 4 seconds to forcefully shut down the device.
This method of powering off should only be used when proper
shutdown through software is not possible.
Rear Mounting
The WebDT 515/ 517 is designed to be secured to VESA-compliant mounting arms or stands. This is
accomplished by detaching the standard metal base from the rear of the display unit. The VESA-
compliant mounting holes at the rear of the device will mate with VESA mounts or arms to meet
the requirements of the deployment.
1.
Remove the detachable base by pressing
upward to remove the cover, then unscrewing
the four screws attaching the base to the
display.
3.
Attach the new VESA-compliant mounting
device or stand to the display.
2.
The display without the base.
4.
The display successfully mounted on a
VESA-compliant mounting arm.
3
ENGLISH