- ページ 10

スイッチ DT SWISS RATCHET EXPのPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。DT SWISS RATCHET EXP 20 ページ。
DT SWISS RATCHET EXP にも：メンテナンス・マニュアル (13 ページ)

2.6 DISMOUNTING THE THREADED RATCHET

Due to the torque which acts on the threaded ratchet during pedaling, the threaded ratchet

tightens during riding. We recommend loosening the ratchet only when the wheel is complete as

the lever is much larger.

1. Clamp the mounting / dismounting tool for

the threaded ratchet into the vice.

2. Fit the hub or wheel onto the tool in such a

way that the teeth of the tool engage in the

teeth of the threaded ratchet.

3. Insert the axle into the hub and through the

threaded ratchet.

4. Put the installation cylinder onto the non

drive side of the hub.

5. Loosen and screw off the ratchet by turning

the hub counterclockwise.

6. Remove the hub from the tool.

7. Remove the ratchet with the bearing.

HXTXXX00N8387S

HXTXXX00N5314S/

HXTXXX00N5025S