- ページ 14

スイッチ DT SWISS RATCHET EXP OSのPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。DT SWISS RATCHET EXP OS 20 ページ。

ページを印刷する
DT SWISS RATCHET EXP OS テクニカル・マニュアル
4. Clamp the mounting / dismounting tool for
the threaded ratchet into the vice.
5. Put the hub on the tool in the vice.
6. Put the installation cylinder onto the
bearing.
7. Tap in the ball bearing carefully with slight
hammer strokes.
8. Check the ball bearings.
→ It must be possible to turn the hub with
slight resistance.
→ The hub must not have axial play.
9. Tap the bearing on the non drive side in or
out and repeat previous steps until the hub
is turning smoothly.
14
HXTXXX00N5314S
HXTXXX00N3157S