- ページ 4
シード選手 Bourgault 6364-24-20のPDF インストールとセットアップをオンラインで閲覧またはダウンロードできます。Bourgault 6364-24-20 14 ページ。 Air seeders
ページを印刷する1.2
I2I (M2M) Setup
To be able to view the shared coverage from other
implements the following conditions need to be met:
1. The I2I (M2M) Coverage Sharing feature
needs to be enabled under the System/
Features/Implement tab in the settings page.
If this feature states it is unlicensed you will
need to contact a dealer to provide the unlock.
2. The CL55 kit needs to be installed on each
implement.
3. The CL55 needs to have a network connection
to the console. Refer to
a. If you do not have connection make sure
under the System Info expanded page that
there is connection with the CL55 device
in the CL55 section at the bottom.
b. This section will not show up if there is no
connection to the CL55.
Refer to
Figure
3.
LED's:
Red - This will be blinking during the boot up
process and go out once startup is completed if
the CL55 has a cellular connection, otherwise
it will keep blinking. A solid red light means
there is an error detected and the system
should be powered down and restarted.
Amber - Indicates that the CL55 has a GPS
position from its connected antenna.
Green - Indicates that the CL55 has power
and the switched power is activated to turn on.
When switched power is deactivated this green
light will go out followed by any other lights
after the shutdown of the CL55 is complete.
Ensure the CL55 is completely shut down
before restarting to ensure proper functionality.
The green light will blink when connection to
another CL55 device is achieved.
Blue - Indicates that the CL55 has a cellular
network connection. Blinking blue light
indicates an update is in progress.
2
Figure
2.
Figure 2 - CL55 Information
Figure 3 - CL55 - LEDs
Instructions