電話アクセサリー ADDCOM ADD-699のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ADDCOM ADD-699 2 ページ。 Handset lifter

ADDCOM ADD-699

Handset Lifter

User Manual

Thank you for choosing the ADDCOM ADD-699 Handset Lifter.

This lifter is designed to allow you to answer and end calls remotely from your desk when

using an ADD-670, ADD-680 or an ADD-C7 wireless headset system.

This box contains:

1. A handset lifter

2. An external microphone cord

3. Adhesive tape to attach lifter

4. This user manual

Features

1. Connection Cord

2. Ring detection LED

3. Noise cancelling

microphones 1& 2

4. Handset supporting lever

5. Lifter arm

6. External microphone jack

7. Adhesive tape

8. Ring detection microphone

9. Slide switch

Cable to connect lifter to wireless base station.

Blinks when it detects the phone is ringing.

Works to reduce false alarms by detecting surrounding background

noise.

Can be adjusted to the left and right side to support a handset.

Lift the handset when ringing is detected and the button on the

base/headset is set to "ON". Lifting height can be adjusted using by

the slide switch (9) to accommodate different handset heights.

An alternative ring detector if the lifter and speaker do not align.

Used to affix the lifter on telephone.

Detect when your phone rings and will transfer the signal to the

wireless base and headset.

Used to adjust the lifting height of the lifter arm height for different

handsets. Height can be adjusted from 1 (lowest) to 3 (highest).