- ページ 4

防犯カメラ ATV NBW436のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。ATV NBW436 13 ページ。 Bullet network camera

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of

time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

15. CAUTION : These servicing instructions are for use by qualified service personnel only. To

reduce the risk of electric shock do not perform any servicing other than that contained in

the operating instructions unless you are qualified to do so.

16. ITE is to be connected only to PoE networks without routing to the outside plant.

17. This product is intended to be supplied by a Listed Power Supply Unit marked "Class 2" or

"LPS" and rated from 12 Vdc, 530 mA.

18. The wired LAN hub providing power over the Ethernet (PoE) in accordance with IEEE 802-3af

shall be a UL Listed device with the output evaluated as a Limited Power Source as defined

in UL60950-1.

19. Unit is intended for installation in a Network Environment 0 as defined in IEC TR 62102. As

such, associated Ethernet wiring shall be limited to inside the building.

20. CAUTION : Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used

Batteries According to the Instructions.

ATTENTION : II y a danger d'explosion s'il y a remplacement incorrect de la batterie.

Remplacer uniquement avec une batterie du même type ou d'un type équivalent

recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux

instructions du fabricant.