- ページ 10

デジタルカメラ Absolute zero apS C830のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Absolute zero apS C830 18 ページ。 360 degrees camera

7. COMMANDS IN DETAIL

You may find all the commands listed on

them.

The user interface has several menus. When the camera is turned on, you are in CAPTURE

MENU. From this menu you can capture video, pictures, transfer data and perform other

most common actions.

The available commands in the CAPTURE MENU are:

a: Adjust Settings – enters the SETTINGS MENU;



b: Beep – produces a 1s beep, if not in "quiet mode";



c: Check Settings – displays the current state of all the settings;



d: Data Transfer Start – initiates data transfer, if USB cable is detected;



i: Info – displays current status of the camera (lens power consumption, elapsed time,

battery status, "quiet mode" status);



m: Manual AE/AWB Lock – lock automatic white balance and/or automatic

exposure. This setting can only be used during video recording, with the white

balance set to AUTO. To lock only exposure or only white balance, the appropriate

value must be chosen in the settings menu under "Manual AE/AWB lock";



p: Take Picture / Start Time Lapse – enters PICTURE MODE and takes a picture or starts

a time-lapse recording, depending on the setting;



r: Start Recording – starts recording video. If recording in progress a new recording is

started.



s: Stop – Stop the current action. If no action is in progress, this function has no effect.



q: Quiet mode – Toggle quiet mode on/off. Quiet mode disables the buzzer and blue

LED located in the push-button.

If lost at any time, pressing 'list' or 'l' displays the available commands.

page

2. Here is a brief commentary explaining