- ページ 2
アダプター Comtrend Corporation PG-9141s-PoEのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Comtrend Corporation PG-9141s-PoE 6 ページ。 Powerline ethernet adapter with power over ethernet
ページを印刷する
NOTE:
An additional PowerGrid 9141s or 9141s-PoE unit and Ethernet cable are
required for each additional device (e.g. PC, Camera, Access Point) you
wish to connect to the network, with a minimum of 2 units required for
setup.
A. Initial Setup
NOTE:
This guide assumes that a PowerGrid 9141s will be the primary connection
to the modem/router and a PowerGrid 9141s-PoE will be used within the
network to connect to a PoE-capable device (e.g. Camera, Access Point, IP
Phone).
1. Ensure that your modem or router is powered on.
2. Plug a PowerGrid 9141s unit into the power outlet closest to the modem/router.
The POWER LED will blink
3. Connect the PowerGrid 9141s unit to the LAN port of the modem/router with an
Ethernet (RJ-45) cable. Wait 10 seconds for the PowerGrid's Ethernet LED and
Power LED to light up
Introduction
GREEN.
GREEN
indicating a stable connection.
Page 2