- ページ 10
無線アクセスポイント Comtrend Corporation WAP-EN1200EのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Comtrend Corporation WAP-EN1200E 14 ページ。 Ac1200 in-wall wireless access point
ページを印刷する
III
Browser Based Configuration Interface
V
The browser-based configuration interface enables you to configure the
v
access point's advanced features. The access point features a range of
advanced functions such as MAC filtering, MAC RADIUS authentication, VLAN
s
configurations, up to 32 SSIDs and many more. To access the browser based
configuration interface:
d
1. Connect a computer to your access point using an Ethernet cable.
s
d
2. Enter your access point's IP address in the URL bar of a web browser. The
access point's default IP address is 192.168.2.2. (Default IP address applies
if No DHCP Server is detected).
3. You will be prompted for a username and password. The default username
is "admin" and the default password is "1234", though it was
recommended that you change the password during setup (see II-2. Basic
Settings).
If you cannot remember your password, reset the access point
back to its factory default settings. Refer to I-5. Reset
4. You will arrive at the "System Information" screen shown below.
10