ホーム
ブランド
AU
電話
AU Qua
基本マニュアル

電話 AU QuaのPDF 基本マニュアルをオンラインで閲覧またはダウンロードできます。AU Qua 3 ページ。

ページを印刷する

Preface

Thank you for buying "Qua phone" (simply called "the product" or "main unit"

from here on).

Before using the product, be sure to read the "Basic Manual" (this manual) to

ensure correct use.

Basic Manual

After you have finished reading this PDF and the printed manuals, be sure to

store them in safe places so that you can retrieve them whenever needed. If

you lose the printed manuals, contact an au shop or Customer Service Center.

List of Packaged Items

Before your start using the product, make sure that you have all the following

packaged with the product.

Main unit

December 2015, 1st Edition

■ Notes on illustrations/screenshots

Regarding notations used in this

Screen illustrations shown in this manual may look different from the actual

document

screens.

In some cases, minor details or a part of a screen may be omitted.

■ Note on button illustrations

Actual screen

In this manual, buttons are represented by simplified as shown below.

Some icons

etc. are

omitted in this

(Volume UP button)

manual.

l (Volume DOWN button)

F (Power button)

Navigation bar

CH N

◎ In this manual, screenshots and operations for the product with au

■ Description of operations for selecting item/icon/button

Nano IC Card 04 attached are described.

◎ Operations from the vertical display are mainly described. Menu

etc.

items/icons/buttons on a screen may be different from the ones in the

Notations used for operation procedures in this manual are as follows.

horizontal display.

Tapping is to select a button or icon displayed on the screen by lightly tapping

◎ Menu items/layers/icons may be different depending on functions,

it with your finger.

conditions, etc.

◎ In this manual, screenshots for body color "Silver" are provided as

Description

Explanation

examples.

Home screen→[

]→

Tap "

" in the bottom of the Home

◎ In this manual, "microSD™ memory card", "microSDHC™ memory card"

[1] [4] [1]→[CALL]

screen. Then, tap "

", "

and "microSDXC™ memory card" are abbreviated as "microSD memory

then tap "

(CALL)" at the end.

card" or "microSD".

In sleep mode, F

In sleep mode, press F (Power button)

◎ All of the indicated amounts exclude tax unless otherwise specified.

(Power button)

- 7 -

Removing au Nano IC Card 04

Place the au Nano IC Card 04 on the tray, making sure that

the notch is oriented properly, then insert the tray straight

• When removing your au Nano IC Card 04, be sure to use the supplied IC

into the au Nano IC Card 04 slot (left side)

Card Tray Ejecting Tool for KYV37 (sample).

After the tray is inserted, hook the IC Card Tray Ejecting Tool for KYV37

Turn the power off and open the card slot cover

(sample) on the edge of the tray and press it all the way.

Hook the IC Card Tray Ejecting Tool for KYV37 (sample) on

• Take care so that the au Nano IC Card 04 does not get over the tray. Do

the edge of the tray and pull it out

not apply excessive force and insert it all the way straight into the slot. If

the tray does not fit into the slot, do not press it with force. Pull the tray

IC Card Tray Ejecting Tool

out and insert it again with the front edge raised. If the au Nano IC Card

for KYV 37 (sample)

04 gets over the tray, the product might not recognize the au Nano IC

Card 04.

Notch

Edge of tray

au Nano IC Card 04

slot (left side)

microSD memory card

slot (right side)

Close the card slot cover

- 14 -

The following items are not included in the package.

・ AC adapter

・ microSD memory card

・ microUSB cable

・ Earphones

◎ The battery is built into the product.

◎ The illustrations of cell phone in the manual are used only for

explaining. They may differ from the actual product.

About Operating Instructions

■"Basic Manual" (This manual)/"Setting Guide"

Handles only basic operations for main features.

For detailed descriptions on various functions, refer to the "Basic Manual

app" installed on the product or "取扱説明書詳細版 (Full Instruction Manual)"

(Japanese) available on the au homepage.

http://www.au.kddi.com/english/support/manual/

IC Card Tray Ejecting

• Company names and product names referred to in this manual are trademarks

Tool for KYV37 (sample)

or registered trademarks of respective companies.

*Dedicated tool for Qua phone

■"Basic Manual app"

You can use the "Basic Manual app" on the product to confirm detailed

operational procedures.

● 取扱説明書 (Instruction Manual)

Certain functions can be directly activated from the application screens on

(Japanese)

which their operations are described.

Home screen → [Others Apps] → [Basic Manual]

● 設定ガイド (Setting Guide)

• If you changed the display language from Japanese to English after the

(Japanese)

initial settings, the folder name of "Others Apps" may be displayed in

● ご利用にあたっての注意事項

Japanese, "その他アプリ".

• When you activate for the first time, follow the onscreen instructions to

(Notes on usage) (including

download and install application.

warranty) (Japanese)

- 1 -

- 2 -

Names and functions of parts

①

⑮

⑯

③

④ ⑤

⑥

Notations used in

this manual

⑩

⑫

⑪

⑬

⑦

⑭

⑧

②

⑨

① Earphone microphone terminal

Used for connecting commercially available earphones or other

accessories.

② Strap hole

③ In camera ( lens)

④ Incoming ( Charging) light

Lights in red while charging.

Blinks according to the settings for incoming call/mail.

⑤ Earpiece ( Receiver)

Hear the other party's voice on call, play sound of answer memo, etc. with

Smart sonic receiver (▶P. 11)

⑥ Light/ Proximity sensor

Light sensor detects the ambient light level to adjust the screen brightness.

The proximity sensor ensures that the touch panel does not accidentally

respond during a call.

- 8 -

- 9 -

Remove the au Nano IC Card 04 from the tray, then insert

the tray straight into the au Nano IC Card 04 slot (left side)

Notch

au Nano IC Card 04

slot (left side)

microSD memory card

slot (right side)

Tray

Close the card slot cover

- 15 -

- 16 -

■ Downloading Manuals

• The Company is not liable for any damages arising from earthquakes,

lightning, storms, floods or other natural disasters, as well as fires, actions

You can download the English version of the Basic Manual from the au website

by third parties, other accidents, intentional or mistaken misoperation by the

(available from approximately one month after the product is released).

customer, or use under other unusual conditions outside the responsibility of

You can find "Basic Manual" (English excerpts from Instruction Manual) on au

the Company.

homepage.

• The Company is not liable for any incidental damages (change/

Download URL:

disappearance of described content, loss of business income, disruption of

http://www.au.kddi.com/english/support/manual/

business, etc.) arising from use or inability to use the product.

• The Company is not liable for any damages arising from failure to observe

When using the product

the described content of this manual.

• The Company is not liable for any damages arising, for example, from

• Before you start using the product, make sure to read the "Safety

malfunction caused by combination with connected devices or software not

Precautions" in this manual to ensure correct use.

related to the Company.

• Before you assume that the product is malfunctioning, check for possible

• Captured image data or downloaded data may sometimes be altered or lost

remedies in the following au Customer Support site of au homepage:

due to faults, repair or other handling of the product. The Company is not

http://www.au.kddi.com/english/support/

liable for any damage or lost income resulting from recovery of these data.

• Communication is not possible even inside the service area in places

• It is recommended you keep a copy of important data in your PC's hard

where the signal does not reach (e.g. tunnels and basements). Also,

disk, etc. Whatever the cause of fault or malfunction may be, the Company

communication is sometimes not possible in poor reception areas.

assumes no responsibility for alteration or loss of saved information.

Communication is sometimes interrupted if you move into a poor reception

• Contents saved in the product, such as contacts, mails and favorites,

areas during communications.

might be altered or lost by an accident, fault, repair or mishandling. Be

• Since this product uses radio waves, the possibility of communication

sure to keep a copy of important contents. Note that Company assumes no

intercepts by third parties cannot be eliminated. (Though LTE/WiMAX 2+/

responsibility for any damages or lost profits resulting from altered or lost

GSM/UMTS system has highly secure confidential communication features.)

contents.

• When connecting to emergency services in Japan, use au VoLTE (LTE

• Note that content data (both charged or free content) saved on the product

network). You cannot connect through 3G (circuit switching network).

cannot be returned to the customer when the product is replaced for repair

• The product is compatible with the international roaming service. Each

of a fault, for example.

network service described in this manual varies depending on the area and

• The product uses liquid crystal for its display. The display response speed

service content.

may become slow when the ambient temperature is low, which is due to the

• Since this product is a radio station under the Radio Law, you may be asked

property of liquid crystal and not a malfunction. The display response speed

to temporarily submit the product for inspection in accordance with the

will return to normal at room temperature.

Radio Law.

• Although the display used on the product is made using high-precision

• IMEI information of your cell phone is automatically sent to KDDI

technology, some pixels (dots) might be lit or out at all times. This is not a

CORPORATION for maintenance a n d monitoring operational status of your

malfunction.

cell phone.

• Before you start using the product overseas, check the relevant laws and

regulations of the country/region you visit.

- 3 -

⑦ Display (Touch panel)

About Smart sonic receiver

⑧ Microphone

The product is equipped with Smart sonic receiver, which transmits sound by

Transmits your voice to the other party during a call. Or used for recording

vibrating the display. Although there is not receiver hole, you can use as usual.

the voice sound. Take care not to cover the microphone with your fingers

during a call or recording a video.

■ Touching to your ear

⑨ External connection terminal

Touch receiver part of the product to your ear as shown below. By covering

Used for connecting Common AC Adapter 05 (sold separately), microUSB

⑰

your ear to shut out surrounding noise, voice sound will be heard more easily.

Cable 01 (sold separately), etc.

⑱

Move position of the product up/down/left/right to adjust according to your

⑩ au Nano IC Card 04 slot

hearing condition or an immediate environment.

⑲

⑪ microSD memory card slot

⑫ Card slot cover

⑳

Receiver

⑬ lr Volume DOWN/UP button

Adjusts sound volume. Press and hold l (Volume DOWN button) for at

least one second to set "Silent mode".

⑭ F (Power button)

Power ON/OFF, activate/deactivate Sleep mode, etc.

⑮ Out camera ( lens)

⑯ Built-in GPS/Bluetooth

/Wi-Fi

/Sub antenna

⑰ Photo light/ Simple light

⑱ Speaker

Ringtone or alarm sound can be heard from here.

⑲ NFC (FeliCa compatible) antenna

⑳

mark

Hold the mark over a reader/writer to use Osaifu-Keitai.

Built-in main antenna

Microphone

* Do not cover antennas with your hand or put stickers etc. Doing so may affect call/

communication quality.

◎ Take care not to cover the microphone of the product with your fingers

when calling.

◎ The back cover of the product is not removal. Removing the back cover

◎ When commercially available earphones are connected, voice sound

with force may cause damage or malfunction.

can be switched to the one via earphones not using Smart sonic

◎ The battery is built into the product and it is not user replaceable. For

receiver.

information about forcing the product to shut down and restart, see

◎ Do not put stickers or sheets on the display. May make receiver sound

"Forcing the product to shut down and restart" (▶P. 23).

to be heard hard.

◎ There may be differences in the hearing easiness among individuals.

◎ Depending on environment, the hearing effect differs.

- 10 -

Attaching/Removing microSD memory

card

◎ Insert a microSD memory card with the right side up in the appropriate

direction. Inserting a microSD memory card forcefully into the slot could

Attaching microSD memory card

result in failure to remove the microSD memory card or damage to the

microSD memory card.

Open the card slot cover of the product

Confirm the direction of the microSD memory card and

Removing microSD memory card

slowly insert it into the slot until it clicks

Insert a microSD memory card until you hear a click and confirm it is

Home screen → [基本機能 (Basic function)] → [Settings] →

locked. Be aware that the card may fly out if you release your finger

[Storage] → [Unmount SD card] → [OK]

before the card is locked. Also, pay sufficient attention to impact, etc.

Doing so might cause fault or injury.

Open the card slot cover of the product

au Nano IC Card 04

Slowly push the microSD memory card toward the slot

slot (left side)

until it clicks

When a click sound is heard, pull back the microSD memory card with

your fingers on it. Keep putting your finger on the microSD memory card

until it comes out a little. Releasing the microSD memory card when

microSD memory card

pushed hard may cause it to jump-out.

slot (right side)

Face logo

of microSD

side up

Close the card slot cover

- 17 -

• You are recommended to store copies of individual data such as photos you

took, videos and music in your PC by sending each file as mail attachment,

etc. Note, however, that you may not be able to make copies of some

copyrighted data even by the above-mentioned means.

• Do not discard the product together with regular trash. Please cooperate

in the collection of the product when it is no longer needed to protect the

environment and effectively use resources. Old product is collected at au

shops and other places.

* "The Company" as appears in this manual refers to the following companies:

Sold by: KDDI CORPORATION ・ OKINAWA CELLULAR TELEPHONE COMPANY

Manufactured by: KYOCERA Corporation

◎ Reproduction of the content of this manual in part or in whole is

prohibited.

◎ The content of this manual is subject to change without notice.

◎ Every effort has been made in the preparation of this manual. Should

you notice any unclear points, omissions, etc., feel free to contact us.

Cell Phone Etiquette

■ Use of cell phones is not allowed in some places.

• Do not listen to music or watch videos while driving a car or motorbike,

or riding a bicycle. Use of cell phones while driving a car or motorbike is

prohibited by law. (Use of cell phones while riding a bicycle may also be

punishable by law.) In addition, stay alert to the traffic around you even when

walking. Surrounding sounds may not be heard clearly, and gazing at the

screen might distract your attention causing a traffic accident. Be especially

careful at railroad crossings, on a platform, and at pedestrian crossings.

• Use of cell phones on board is restricted. Follow the instructions of each

airline.

- 4 -

- 5 -

au Nano IC Card 04

• Before installing or removing

au Nano IC Card 04

your au Nano IC Card 04,

be sure to turn the product

off. Also, make sure that the

microUSB plug of the specified

AC adapter or other accessory

IC (metal) part

is disconnected from the

product.

• The product is compatible with the au Nano IC Card 04 only. You

cannot use the product with an IC card other than the au Nano IC

Card 04.

◎ Note the following points, otherwise handling the au Nano IC Card 04

may cause malfunction or damage to the card, the tray or the product.

• Do not touch the IC (metal) part of the au Nano IC Card 04 or the IC

card terminal inside the product.

• Insert in the correct direction.

• Do not use force to attach or remove.

◎ When the au Nano IC Card 04 is not attached properly or the au Nano

IC Card 04 is abnormal, an error message appears.

◎ Do not lose the au Nano IC Card 04 after it has been removed.

◎ Do not insert your au Nano IC Card 04 with an adapter attached to it.

Doing so might cause a fault.

- 11 -

- 12 -

Slowly pull the microSD memory card

Slowly pull the microSD memory card straight out.

Sometimes microSD memory card cannot be unlocked and may not come

out smoothly. In such case, pull it out with your finger.

Close the card slot cover

◎ Do not touch the terminal part of microSD memory card.

◎ Do not remove the microSD memory card forcefully. It may result in

damage to the microSD memory card or the data loss.

◎ The microSD memory card may be warm after a long time use. It is

normal.

◎ When removing the microSD memory card, be sure to unmount to

prevent data from loss (deletion).

- 18 -

- 19 -

■ Consider people around you

• To prevent ringtone from bothering other people, not only refrain from making

a call but also power off or use Silent mode at a movie theater, theater,

museum, library, etc.

• In a city area, use in a place where you do not bother people walking.

• It is extremely dangerous to walk while looking at the screen of the cell

phone. Do not make calls or operate a cell phone while walking or by

stopping suddenly.

• Move to a place where you do not disturb others while you are in shinkansen,

a hotel lobby, etc.

• Be careful not to be loud while talking.

• Be careful of sound leakage from earphones in trains or other places with

many people around you.

• Ask permission if you take photos with your cell phone camera.

• There may be a person with a cardiac pacemaker nearby at a place filled

with people such as in a crowded train. Set "Airplane mode" or turn off

beforehand.

• When a medical institution has laid down designated areas where use of

the product is prohibited or is not allowed to be brought in, abide by the

instructions of that medical institution.

- 6 -

Attaching au Nano IC Card 04

• When installing your au Nano IC Card 04, be sure to use the supplied IC

Card Tray Ejecting Tool for KYV37 (sample).

Turn the power off and open the card slot cover

Hook the IC Card Tray Ejecting Tool for KYV37 (sample) on

the edge of the tray and pull it out

IC Card Tray Ejecting Tool

for KYV 37 (sample)

Tray

- 13 -

Charging

When you purchase your product, the internal battery is not fully charged.

Make sure to charge the product before use. When the charging light in red

turns off, charging is complete.

◎ The product may become warm while charging, but this is not

abnormal.

◎ Charging while using camera etc. may take longer.

◎ When you operate the product with the specified charger connected,

the product may repeat short-time charging/discharging resulting in

short battery life.

◎ When temperature of environment or the product is extremely high

or low, charging may be stopped. Try to charge the battery as far as

possible at room temperature.

◎ If the charging light blinks in red, check if the product is correctly

connected. Even if the light keeps blinking, stop charging and then

contact an au shop or Keitai Guarantee Service Center.

◎ If charging is stopped while the charging light is still turned on, the

battery may not be fully charged even with "

" (Full) displayed. In

that case, available time will be short.

◎ Do not allow metal accessories or conductive foreign objects (metal

fragments, pencil leads, etc.) to come into contact with or get inside the

connection terminal.

- 20 -