- ページ 5

DJ機材 ABSTRACT Futurescan 1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。ABSTRACT Futurescan 1 19 ページ。

Abstract Universal Instruction Manual

Setting the unit up

Ensure that fixings are sufficient to carry the weight of the unit. The unit is fan

cooled and you must make sure that free airflow is maintained around it. Ensure

there is at least 1 metre between the lens of the unit and any surface which the

light beam can shine on.

For Club range units, the unit should be installed with the mirror at the top to

ensure best light output.

You can operate the unit in two ways:

"Stand alone" mode, where the unit listens to the music and generates its

own complex lightshow. This mode is good when you want a quick and

impressive show, or if you don't have time to program or operate the

light show.

DMX controlled mode, where you connect a controller such as the CE

controller, the Clubshow or a standard lighting desk to the unit and

control its movements yourself. This mode is best for live performance, or

if you want to have full control over the light show.

Setup for Stand Alone mode

All Abstract products have a sophisticated built-in lightshow, which is

compatible across the whole range of products - you can connect any mix of

units together and a fascinating synchronised lightshow will be produced.

If you have more than one Abstract unit, you can link the units using DMX

cables (balanced microphone cables should work). Connect the DMX out (the

socket) on the first unit to the DMX in (plug) on the second unit. Then continue

linking as many other units as you want. The first unit will then control the other

units to give an automatic synchronised light show.

You can tell which unit is controlling the light show because its green light will

be flashing. The green light will be permanently lit on all the other units.

Remote control for Futurescan 1, Gladiator Revolution and DuoColour:

Connect the remote control to the first unit in the DMX line using a stereo jack

cable. Not all units are fitted with the remote control socket, so ensure a

"master" unit fitted with the socket is first in the DMX line. The remote will

then control all the other lights in the DMX line.

Page 5