- ページ 3

音楽機材 Abstract Data ADE-31 Logic bossのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Abstract Data ADE-31 Logic boss 3 ページ。 2 stage, switched, cascading, logic module

ページを印刷する

2: Technical

OVERVIEW:

STAGE A:

STAGE B:

PRECAUTIONS:

CREDITS:

2 stage, switched, cascading, logic module

Up to 4 inputs & 12 outputs – simultaneously

Unlinking gives 2 independent 6 part stages

Link stages by CV & on-board switching

RTL works on all input types – not just logic

LED indicators for all inputs & outputs

Power supply reverse-voltage protection

Low-profile build mounts in any depth rack

1: NOR 1:

2x input (IN 1 / IN 2)

2: NAND 1:

2x input (IN 1 / IN 2)

3: NAND 2:

2x input (OR 1[A] / NAND 1[A])

4: OR 1:

1x input (NOT(NOR 1[A]))

5: AND 1:

1x input (NOT(NAND 1[A]))

6: AND 2:

1x input (NOT(NAND 2[A]))

7: NOR 1:

2x input (IN 3 / Link A state (AND2[A] or Low))

8: NAND 1:

2x input (IN 3 / Link B state (AND2[A] or Low))

9: NAND 2 (Unlinked):

2x input (OR 1[B] / NAND 1[B])

XNOR (Linked):

3x input (OR 1[B] / NAND 1[B] / IN 3)

10: OR 1:

1x input (NOT(NOR 1[B]))

11: AND 1:

1x input (NOT(NAND 1[B]))

12: AND 2: (Unlinked)

1x input (NOT(NAND 2[B]))

XOR: (Unlinked)

1x input (NOT(XNOR))

The ADE-31 uses the Doepfer standard for power connection and cable

orientation. The RED stripe on the supplied power cable connects to the

NEGATIVE (-12V) rail on the ADE-31 with the RED stripe facing DOWN.

This is marked on the back of the ADE-31 PCB as "-12 RED".

The ADE-31 has diode and polyfuse protection built in but an incorrectly

connected cable may still cause damage to the module or the power supply.

The rear panel of the ADE-31 has exposed parts and connections. Please

ensure when handling the ADE-31 that the unit is held by the sides of the

front panel or the sides of the PCB.

Rory Dow

Dave White

http://www.abstractdata.biz

[email protected]

Page 3 of 3

Version 1.0 June 2013