- ページ 3
スイッチ 3onedata IPS716-2GC-4POEのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。3onedata IPS716-2GC-4POE 3 ページ。 Managed industrial poe ethernet switch
3onedata IPS716-2GC-4POE にも： ユーザーマニュアル (4 ページ)
ページを印刷する
Step 3
Enter device's username and password in the login
window as shown below.
Click "OK" button to login to the WEB interface of
Step 4
the device.
Note:
The default IP address of the device is "192.168.1.254".
The default username and password of the device is
"admin".
If the username or password is lost, user can restore it to
factory settings via device DIP switch or management
software; all modified configurations will be cleared
after restoring to factory settings, so please backup
configuration file in advance.
Please refer to user manual for specific configuration
method of logging in to WEB interface and other
configurations about network management function.
【Specification】
Panel
1000Base-SFP, optional Gigabit
SFP
Gigabit Combo port
10/100/1000Base-T(X)
RJ45
100M PoE copper port
PoE power supply pin
Console port
Alarm interface
Indicator
Exchange attributes
Backplane bandwidth
Packet buffer size
MAC table size
Power supply
Input power supply
Access terminal
Consumption
No-load
Full-load
slot
or
Environmental Limits
Gigabit
Working temperature
Storage temperature
Working humidity
Protection grade
10/100Base-T(X)
self-adapting
RJ45
port,
full/half
duplex
self-adaption
or
specified
operating
mode,
support
MDI/MDI-X self-adaption; the
greatest output power of single
PoE port is 30W
V+, V+, V-, V- correspond to 1,
2, 3, 6
CLI command management port
(RS-232), RJ45
2 pins 7.62mm pitch terminal
blocks, support 1 channel relay
alarm information output, current
loading ability is 1A@24VDC or
0.5A@120VAC
Power
indicator,
running
indicator,
interface
indicator,
alarm
indicator
and
PoE+
indicator
7.6G
1Mbit
8K
48VDC,
dual
power
supply
redundancy,
anti-reverse
connection
4 pins 7.62mm pitch terminal
blocks
7.9W@48VDC
113.4W@48VDC
-40~75℃
-40~75℃
5%~95% (no condensation)
IP40 (metal shell)