- ページ 5
音楽ミキサー Abstract Data ADE-60のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Abstract Data ADE-60 11 ページ。 4:4 mix utility
Abstract Data ADE-60 にも： ユーザーマニュアル (17 ページ)
ページを印刷する
3: Rear Connections
POWER CONNECTION:
CHANNEL 1 USER CONFIG:
CHANNEL 2 USER CONFIG:
CHANNEL 3 USER CONFIG:
CHANNEL 4 USER CONFIG:
PRECAUTIONS:
© 2017 Abstract Data Ltd.
10-16 pin Eurorack power connection
Attenuversion
Attenuversion
Attenuversion
Attenuversion
Only connect the power cable to the power connection as shown.
DO NOT CONNECT THE POWER CABLE TO ANY OTHER PORT!
The ADE-60 uses the Doepfer standard for power connection and cable orientation.
The RED stripe on the supplied power cable connects to the NEGATIVE (-12V) rail
on the ADE-60 with the RED stripe facing DOWN. This is marked on the back of
the ADE-60 PCB as "– RED".
The ADE-60 has diode and polyfuse protection built in but an incorrectly connected
cable may still cause permanent damage to the module or the power supply.
The rear panel of the ADE-60 has exposed parts and connections. Please ensure
when handling the ADE-60 that the unit is held by the sides of the front panel or
the sides of the Printed Circuit Board (PCB).
POWER CABLE
-RED
RED STRIPE
Gain
Biasing settings for channel 1
Gain
Biasing settings for channel 2
Gain
Biasing settings for channel 3
Gain
Biasing settings for channel 4
Page 3 of 8
Version 1.0 October 2017