電気シェーバー Conair GMT175RCSのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Conair GMT175RCS 2 ページ。 Conair all-in-one beard+mustage battery operated trimmer

ページを印刷する

Important Safety

2. This appliance should not be used by, on,

or near children or individuals with certain

InStructIonS

disabilities.

3. Use appliance only for its intended use

When using electrical appliances, especially

as described in this manual. Only use attach-

when children are present, basic safety pre-

ments recommended by the manufacturer.

cautions should always be taken, including the

Do not use an extension cord to operate the

following:

appliance.

read all InStructIonS

4. never operate the appliance if it has

a damaged cord or plug, is not working

before uSIng

properly, has been dropped or damaged, or

dropped into water. return the appliance

Keep away from water

to a conair service center for examination

danger

and repair.

– Any appliance is electrically

5. Keep the appliance cord away from heated

live, even when the switch is off.

surfaces.

To reduce the risk of death or injury by

6. Do not pull, twist or wrap the cord around

electric shock:

the appliance.

1. always unplug appliance from electrical

7. Never drop or insert any object into any

outlet immediately after using.

opening of the appliance.

2. Do not place or store appliance where it

8. Do not place the appliance on any surface

could fall or be pulled into a tub or sink.

while it is operating.

3. Do not use appliance while bathing or in the

9. Never operate the appliance with the air

shower.

openings blocked or place appliance on a soft

4. Do not place appliance in, or drop into,

surface, such as a bed or couch, where the

water or other liquids.

air openings may be blocked. Keep the air

5. If appliance has fallen into water, do not

openings free of lint, hair, an the like.

reach for it. Unplug immediately.

10. Do not use the appliance with a damaged

do not reach

or broken comb or with teeth missing from

the blades, as injury may result. Before each

Into the water

use, make certain the blades are aligned

properly and oiled.

warnIng

– To reduce the risk of burns,

11. Do not use the appliance outdoors or

electric shock, fire, or injury to persons:

where aerosol (spray) products are being used

1. Never leave a plugged-in appliance

or oxygen is being administered.

unattended.

Save theSe

12. Remove used batteries promptly.

13. Do not mix old and new batteries.

InStructIonS

14. Do not mix alkaline, standard (Carbon-

Zinc), or rechargeable (Nickel cadmium or

for houSehold uSe only

Nickel Metal Hydride) batteries.

operatIng InStructIonS

1. Remove the battery compartment cover by

uSer maIntenance

pushing in and down toward the bottom of the

trimmer.

InStructIonS

2. Align the two AA batteries with the positive

and negative positions indicated inside the bat-

takIng care of your trImmer

tery compartment. Being careful not to bend the

oIlIng the bladeS

clips, insert the negative end of each battery first

About once a month you should oil the trim-

so it will slip easily into position.

mer blades with the oil provided in your kit. It

3. Return the battery cover to its original position

is best to do this over a piece of newspaper.

by pushing it in and up until you hear a small

Turn the trimmer on and hold it so that the

click as it locks into place.

blades are pointed downward. Spread one

4. To use your trimmer, push ON/OFF switch

drop of oil across the blades, then turn the

upwards to ON position.

trimmer off and wipe away the excess oil with

5. After you finish using your trimmer, push

a soft cloth.

down on the ON/OFF switch to turn the trimmer

Be careful not to use too much oil and don't

off.

oil your trimmer more than necessary, as this

6. For your convenience, the trimmer comes

could damage the motor. (Never attempt to

with a storage base to hold the trimmer and

oil the motor bearing, as it is permanently

accessories.

lubricated.) After oiling the blades, return the

7. Always purchase the correct size and grade

trimmer and oil packet to the trimmer storage

base. KEEP OIL OUT OF REACH OF CHILDREN.

of battery most suitable for the intended use.

8. Replace all batteries of a set at the same

time.

9. Clean the battery contacts and also those of

the devise prior to battery installation.

10. Ensure the batteries are installed correctly

with regard to polarity (+ and -).

11. Remove batteries from equipment, which is

not to be used for an extended period of time.

on/off SwItch

removIng blade Set

To operate, simply push slide toward blade; to

This trimmer comes with a detachable

blade set; which makes maintenance and

stop, push slide away from blade.

replacement easy.

Battery Position

To remove the blade set:

• Make sure the trimmer is in the off position

• With the power switch facing you, press the

blade on the teeth and in direction away from

you until they pop out of the housing

On/Off Switch

to replace the blade Set

*Requires 2 AA batteries (not included). We recommend

• Looking at the trimmer from above you will

using alkaline batteries in your trimmer because they

see a notch at the back of the trimmer.

last longer.

• There is a tab on the blade set on the bottom,

blade care

opposite the blades

Because the trimmer blades are precision-

Position that tab so that it fits into the notch

made for a very special use, they should

inside the trimmer head

always be handled with care. Each time you

Push the blade set down onto the trimmer

finish using the trimmer, take the cleaning

head until it snaps into place.

brush provided and brush away any loose hair

growIng a beard and muStache

that has collected in the blades. Then store

the trimmer in its storage base to protect the

There are three key factors that will determine

blades until the next use.

which beard or mustache style is best for you:

Be especially careful when changing or adjust-

1. The shape and dimensions of your face.

ing blades. When you have your trimmer ser-

2. The natural growth of your beard/mustache.

viced, be sure that both blades are sharpened

3. The thickness of your beard/mustache. If

or replaced at the same time.

you are unsure about the type of beard or

To promote the long life of the appliance, use

mustache that would most suit your face,

your trimmer only for the purpose intended

speak with a professional hair stylist and ask

by the manufacturer – to trim your beard and

for an opinion on what style would be best.

mustache.

Once your beard or mustache has been styled,

it is essential that you maintain its appear-

ance. To do this, use your trimmer to trim your

beard/mustache weekly.

For the best trimming results, your beard

should be slightly damp (NOT WET) when

now you're ready to trIm

using your trimmer. This will prevent the trim-

your beard

mer from removing more hair than desired.

1. Your trimmer adjusts to five positions so you

typeS of beardS/muStacheS

can have a beard length from 1/8" (shortest)

to 5/8" (longest).

2. To use the 5-position comb, slide the unit

over the trimmer blades and snap it down into

position. At first, until you become familiar with

the adjustments, use the longest trim setting

(5/8"). (You can always go back and make

your beard a little shorter.)

3. Begin trimming your

beard using smooth,

even strokes. Start with

gettIng Started:

your sideburns and work

outlInIng your beard

downward toward your

1. It is always best to begin

chin. (Never attempt to trim against the natural

with a clean, slightly damp

growth of your beard because the hair will be

beard.

cut too short.)

2. After you have combed

4. If you decide you want a closer trim, you

through your beard in the

can now adjust the 5-position comb attach-

direction it grows naturally, you will want to

ment to a shorter setting (such as 1/2" or

outline the desired shape, beginning under

3/8") and go over your beard again until you

your jawline.

achieve the desired length.

3. Begin defining your beard's shape under

blendIng the JawlIne

your chin and work upward on each side

1. The three jawline attachments will help you to

of your face toward your ears. Then define

achieve a neat, finished trim under your chin. To

the upper outline of your beard across your

use one of the attachments, press it down over

cheeks, past your sideburns, and toward your

the trimmer blades until it clicks into position.

hairline.

2. Hold the trimmer in an upright position and

begin trimming under your jawline, using short,

even strokes.

3. After your beard is blended, turn off the trim-

mer and remove the attachment by gently pull-

ing up on tab.

to trIm your muStache

1. For best results, start with a clean, slightly

damp mustache.

2. Comb through your

mustache in the direction

it grows.

3. Place the 5-position comb over the trimmer

blades and snap it into position. It is a good idea

to start with the longest trim setting adjustment.

(You can always go back and cut your mustache

more closely with a shorter setting.)

alwayS trIm your muStache

from the top down

4. After your mustache

has been trimmed to the

desired length, remove

the 5-position comb and,

using the blades only,

define the outline of the bottom of

your mustache.