- ページ 13

カーアラーム 2bfirst Cadillock AlarmのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。2bfirst Cadillock Alarm 20 ページ。

Panic alarm function / vehicle finder alarm

Press the button

The alarm signal will sound for 30 seconds without interruption; as

soon as you press the button

off. The other settings are not interrupted, however, and the

panic/vehicle finder alarm is automatically reset.

Setting the sensitivity of the shock sensor with the remote

control

Press the buttons

tone will sound once (this tone is distinguished from the signal when

the alarm system is switched on and off). When the confirmation

tone sounds once, the lowest sensitivity level is set. When you

press

twice and thereby show that the medium sensitivity level is set.

Press

and

three times and indicate that the highest sensitivity level has been

set. In order to return to the original setting, press

original setting is the lowest sensitivity level.

Setting the sensitivity of the voltage sensor with the remote

control

Press the buttons

tone will sound once (this tone is distinguished from the signal when

the sensitivity of the shock sensor is set). When the confirmation

tone sounds once, the lowest sensitivity level is set. When you press

and

and thereby show that the medium sensitivity level is set. When you

press

and

times and indicate that the highest sensitivity level has been set.

The original setting is the medium sensitivity level.

This function to set the voltage sensor was also integrated in con-

sideration of the automatic transmission of traffic messages in some

to deter potential thieves or to find the vehicle.

and

a second time, the confirmation tone will sound

a third time and the confirmation tone will sound

and

a second time, the confirmation tone will sound twice

a third time, the confirmation tone will sound three

again, the alarm signal is switched

simultaneously and a confirmation

and

. The