- ページ 10

コントローラー AirTurn BT200SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AirTurn BT200S 19 ページ。 Hands-free bluetooth controllers for bluetooth 4 tablets and computers

CHANGING THE MODE

Turn on the BT200S.

Press and hold the MODE button. The red LED will flash

Release the MODE button following the number of

flashes that reflects the desired MODE. The blue and red

LED will flash together the number of times indicating

which MODE has been set.

Example: To set MODE 2, hold the MODE button for 2

flashes of the red LED, release, and both LEDs will flash 2

times to confirm the MODE 2 setting.

Note: Once the MODE has been set, it will remain the same

until it is changed following the above steps.

To turn on the virtual keyboard in iOS, put the cursor into a text

box and press the Power Button. Both LEDs will flash once to

signify that the button was pressed. The button will only work in

Modes 2-6. Virtual keyboard support for MODE 1 is automatic.

This is not available for Android except when using MODE 1.

once per second from 1 to 7 flashes. The number

of flashes corresponds to the MODE number.

Be sure to count the flashes.