- ページ 7

ドライヤー DAN DRYER 3000のPDF メンテナンス・サービスマニュアルをオンラインで閲覧またはダウンロードできます。DAN DRYER 3000 13 ページ。 Hand dryer

Reference

Version

3000-ENG

08.01.2018

Cleaning the inside of the machine

7. Use compressed air (max. 8 bar) to remove

dirt and carbon dust from the motor and motor

housing. If compressed air is not available, parts

may be cleaned with a soft brush or gently with a

vacuum cleaner.

8. Lift the large rubber gasket out of the top of the

motor housing. Clean it and degrease with alco-

hol. Clean the small rubber gasket placed at the

bottom of the motor housing in the same manner.

9. The heating element is placed at the bottom of

the motor housing. Clean it using compressed

air (max. 8 bar). Blow from both sides, and be

careful not to damage the heating element.

DAN DRYER A/S • Alsikevej 8 • DK-8920 Randers NV • www.dandryer.com • [email protected]

Document

3000 DAN DRYER Hand dryer.

Maintenance and service manual

10. Put the small rubber gasket back in place at the

11. Put the motor back in the bottom part of the fan

12. Reconnect motor wires to the timer unit

Lang.

bottom of the fan housing. Be careful not to turn it

upside down.

housing. Make sure that the motor rests properly

between the two "forks" and on the small rubber

gasket.

(appearance depends on the timer type).

Please be careful not to damage wires.

Page

7 of 12