- ページ 9

エクステンダー ADDER AdderLink X-DVIPRO-MS2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ADDER AdderLink X-DVIPRO-MS2 16 ページ。 Adder pro dvi

Connections at the remote module

1 Place the remote module adjacent to the user location.

2 Connect the supplied DVI-D lead from the video monitor to the DVI output socket of

the remote module.

To video monitor

[MS2 variant only] Optionally attach a

second DVI video monitor using the

supplied additional video cable.

To secondary video monitor

To primary video monitor

3 Connect the leads from the keyboard

and mouse to the two USB sockets on

the remote module.

Note: On the single head variant, it is not

important which of the four sockets are

used.

To keyboard, mouse

and other USB

peripherals

IMPORTANT: The total current that may be drawn from the USB ports is 1.2A, which

should be sufficient for a keyboard, mouse (no more than 100mA each) and any two

other devices (500mA maximum each). If more power for USB devices is required,

please use a powered USB hub.

[MS2 variant] Connect the leads from

the keyboard and mouse to the two

USB sockets on the remote module.

Fed from the UPPER USB

socket on the local unit

To keyboard, mouse

and other USB

peripherals

Fed from the LOWER USB

socket on the local unit

continued