- ページ 6
エクステンダー ADDER AdderLink X50 USBのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ADDER AdderLink X50 USB 18 ページ。
ページを印刷する
Installation
Connections
Installation of the X50 modules is straightforward with minimal configuration
requirements in most cases.
•
Connections at the local module
•
Connections at the remote module
Important
Do not attach a USB hub to the X50 remote, nor plug the X50 local module into
another USB hub. To do so will reduce the maximum cable length over which the
system will extend USB; also, some USB hubs may not provide enough power to
operate the local unit.
Do not use USB cables that are longer than 3 metres to connect the local module
to the computer or to connect the remote module to the USB peripherals.
Mounting
The X50 modules offer two main mounting methods:
• Supplied four self-adhesive rubber feet
• Rack mount brackets - see below
5