- ページ 2
防犯カメラ Concept Pro AIR4528-IP8M-ZのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Concept Pro AIR4528-IP8M-Z 8 ページ。 Ip external large bullet camera
1. CONTENTS
Packaging Contents
IP Camera x1
Technical Documents
Mounting Plate x1
Mounting Plate Bolts x4
Sunshield x1
Allen Key x2
2. INSTALLATION
Important: Ensure all precautionary procedures are observed during installation.
It is recommended that the camera is tested in low light and day light conditions
at the point on installation to ensure continuity of effective CCTV monitoring.
334mm
1
2
3
4
Quick Start Guide x1
Rubber Gasket x1
Mounting Template x1
Sunshield Bolt x1
RJ45 Waterproofing Kit x1
1. Open Packaging
Open packaging, remove camera, and set aside the
included accessories. Locate the cable cutout on the
side desired.
2. Drill Mounting Holes
Attach the included mounting template on the
mounting surface and drill holes according to the
template. Insert included wall plugs into the holes.
3. Mount the Camera
Mount the included mounting plate to the wall. Insert
cables through the mounting hole. Position the camera
over the mounting holes and use the included fitting
screws to affix the camera to the mounting surface.
4. Adjust Camera Positioning
Loosen locking screws and axes to move the camera
to the desired monitoring angle. Re-tighten after the
desired angle is found.
Terminal Blocks x2
Fitting Screws x4
Wall Plugs x4
IP CAMERA QUICK START GUIDE