- ページ 4

ネットワーク・ルーター 3onedata ICPE2300A-BW-8A25-1GC3GT-PD2P12 48のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。3onedata ICPE2300A-BW-8A25-1GC3GT-PD2P12 48 5 ページ。 Industrial indoor 5g wireless router

ページを印刷する

LED

Indicate

Description

or turned off

The indicators are all off, indicating

that no 5G/4G bridge has been

established.

One indicator is on. It means 5G/4G

signal at the opposite end is weak

Two indicators are on. It means

5G/4G signal at the opposite end is

normal

All indicators are on. It means

5G/4G signal at the opposite end is

strong

USB interface has been connected

USB

interface

OFF

connected

OFF

Reserved

SIM1/SIM2 card is enabled or has

SIM1-

dialed successfully

SIM2

SIM1/SIM2 card is disabled or

OFF

installed abnormally

【Logging in to WEB Interface】

This device supports WEB management and configuration.

Computer can access LAN port of the device via Ethernet

interface. The way of logging in to device's configuration

interface via IE browser is shown as below:

Step 1

Configure the IP addresses of computer and the

device's LAN port to the same network segment, and the

network between them can be mutually accessed

Step 2

Enter device's IP address in the address bar of the

computer browser.

Step 3

Enter device's username and password in the login

window as shown below.

Step 4

Click "Login" button to login to the WEB interface of

the device.

has

not

been

Note:

The default IP address of the device's LAN port is



"192.168.1.254".

The default user name and password of the device are



"admin".

If the user name or password is lost, user can restore it



to factory settings via restoring factory setting button;

all modified configurations will be cleared after

restoring to factory settings, so please backup

configuration file in advance.

Please refer to user manual for specific configuration



method of logging in to WEB interface and other

configurations about network management function.

【Specification】

Panel

Gigabit

copper port

(LAN)

Gigabit

COMBO

indicator

(WAN)

3 10/100/1000Base-T(X) self-adaptive

RJ45 LAN ports, support automatic flow

control, full/half duplex mode,

MDI/MDI-X self-adaption

1 10/100/1000Base-T(X) self-adapting

RJ45 port or 1000 Base-X SFP slot, it's

WAN port by default; The copper port

supports automatic flow control, full/half

4 / 5

duplex, MDI/MDI-X self-adaptation, and

support PoE power receiving

Antenna

2.4G

antenna



RP-SMA-K(Female);

interface

5.8G

antenna



RP-SMA-K(Female);

4 5G Sub-6G antenna interfaces,



SMA-K(Female);

USB

1 Type-A USB 2.0 Female, this interface

is reserved

interface

SIM card slot

1 Micro SIM card and 1 Nano SIM card,

redundant backup; 1 Micro-SD card is

reserved

Console port

CLI command line management port

(RS-232), RJ45

Alarm

6-pin 5.08mm pitch terminal blocks (2-pin

interface

for relay), support 1 relay alarm output,

this interface is reserved

Indicator

Running indicator, alarm indicator, power

indicator, 2.4G indicator, 5.8G indicator,

Wireless bridge signal strength indicator,

interface indicator, PoE indicator, 5G

indicator, 5G bridge signal strength

indicator,

USB

indicator,

indicator, SIM card indicator

WiFi Radio Frequency

802.11b/g/n

2.412GHz~2.4835GHz

802.11ac/n/a

5.18GHz-5.825GHz

power

20dBm

output

Modulation

DBPSK,DQPSK,CCK,OFDM,16-QAM,64

system

-QAM,256-QAM

WiFi Receiving Sensitivity

802.11n_HT

-82dBm@MCS0,-64dBm@MCS7

802.11n_HT

-85dBm@MCS0,-67dBm@MCS7

802.11g/a

-91dBm@6Mbps,-72dBm@54Mbps

interfaces,

card