- ページ 8

オーブン Abt W10752682のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Abt W10752682 20 ページ。 27" (68.6 cm) and 30" (76.2 cm) electric single and double built-in oven flush installation kit

ページを印刷する

3. In the same manner, remove and replace the plastic spacer

on the left side of the oven.

New plastic spacer

Replace Plastic Spacers on Double Ovens

1. Remove the 2 screws, 1 in each spacer, attaching the 2

plastic spacers (A) to the right side of the oven.

2. Using the 2 screws removed, install 2 new plastic spacers

(B) provided with this kit.

A. Plastic spacer

B. New plastic spacer

3. In the same manner, remove and replace the 2 plastic

spacers on the left side of the oven.

Install Oven

1. Using 2 or more people, lift the oven partially into the cabinet

cutout. Use the oven opening as an area to grip.

NOTE: When pushing the oven into the cabinet, open the

oven door and push against the seal area on the front frame.

Do not push against the outside edges.

2. Push against the front frame of the oven to push oven into

cabinet. Push oven completely into cabinet and center in

cabinet cutout.

3. Push the oven completely into the cabinet, and center the

oven into the cabinet cutout.

4. Remove the tape from the black front trim piece.

Securely fasten the oven to the cabinet using the #8-14 x

■

" (1.9 cm)screws provided.

Insert the screws through the hole in the black trim piece,

■

aligning with the hole in the oven frame. Do not

overtighten the screws.

A. Oven frame

B. Oven frame hole

C. Black trim piece