- ページ 8
ネットワーク・ルーター 3onedata IES308のPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。3onedata IES308 10 ページ。
ページを印刷する
wires are
perpendicular at the intersection point.
2. NOTE: Do not run signal or communications wiring and power
wiring in the same wire conduit. To avoid interference, wires
with different signal characteristics should be routed separately.
3. You can use the type of signal transmitted through a wire to
determine which wires should be kept separate. The rule of
thumb is that wiring that shares similar electrical characteristics
can be bundled together.
4. Keep input and output wiring separated. It is strongly advised
that you label wiring to all devices in the system when necessary.
Specifications:
Interface
RJ45 Ports: 10/100BaseT(X) auto connection, F /H duplex or force
work mode, and support MDI/MDI-X connection ,
1000V electromagnetism isolation for protection
Alarm output interface： One relay alarm output. Support power, port
link and network alarm
Indicator: Power, Port link, abnormity alarm indication, 10M/100M
Rate
Technology
Standards:
IEEE802.3, IEEE802.3x, IEEE802.3u
Forwarding and Filtrate Rate: 148810pps
Processing type: Store and Forward
System exchange bandwidth: 4.8G
Relay
Max voltage: DC30V
Max power input: 24VA
Power
Input Voltage: 24VDC (12VDC~48VDC)
Overload Current Protection
Support dual power backup
Mechanical
Dimensions: 136mm×52mm×105mm (H×W×D)
Casing: IP30 protection, Metal case
Your Serial and Data Communications Expert
Shenzhen 3onedata Technology Co.,Ltd