ページを印刷するGo to the Bluetooth menu on the Bluetooth device and search for
the stereo headset devices.
① Select the "FIPO" among the searched devices.
② Type "0000" at Pass/Pin code when required.
③ You will see the blue LED of the FIPO blinks twice quickly when
it is connected.
Auto re-connection
The FIPO will try to re-connect to the Bluetooth device which was
connected lastly under following conditions.
① When the FIPO turns on with the power supplied.
② when it was disconnected from the paired Bluetooth device
with an improper procedure.
Follow below paring procedure to disable the auto-reconnection
function.
① Go to the Bluetooth menu on the Bluetooth device and search
for the stereo headset devices.
② Select the "FIPO" among the searched devices.
③ Type "9999" at Pass/Pin code when required.
④ The initial pairing will fail.
⑤ Type "9999" at Pass/Pin code when required again.
⑥ You will see the blue LED of the FIPO blinks twice quickly when
it is connected and the auto- reconnection function is disabled.
FIPO User Manual
5