- ページ 5

メディアプレーヤー Conceptronic CSM3PLのPDF ファームウェアのアップグレード手順をオンラインで閲覧またはダウンロードできます。Conceptronic CSM3PL 7 ページ。
Conceptronic CSM3PL にも：ファームウェアのアップグレード手順 (6 ページ)

2.6 As soon as the upgrade process is completed, the screen will go black.

Note:

The device is still turned on. You need to manually turn off the device by pressing the

'POWER' button on the remote control. You can completely turn the device off by

turning off the switch on the back side of the device.

2.7 Remove the USB stick or memory card from the device.

Note:

Never do this when the device is turned on and the upgrade process is busy. This will

result in an unusable product.

3. Checking the current firmware version

3.1 Make sure the CSM3PL is connected to a TV or monitor.

3.2 Press the "SETUP" button on the remote control.

3.3 Highlight the "FIRMWARE VERSION" option. The firmware version is displayed on the lower left

corner. This should be "CSM3PL_FW_VER_1.58D".

3.4 If the displayed version isn't the same as the version described at point 3.3, then you need to

repeat the upgrade procedure as described in chapter D.

www.conceptronic.net

Page 5 of 7