- ページ 6

体重計 Anyload ES-HB SeriesのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Anyload ES-HB Series 8 ページ。 Precision balance

6.2. Weighing Method

With no load on the platform , Press

"0", Put the object on the platform. Wait until the unit "g" appears and the

reading value becomes stable, then the weight can be read.

First, take away the object from the platform. Then, press

the balance will display "CAL" and then press

then the calibrating weight value will be shown, put the corresponding

calibrating weight on the center of the platform according to the shown weight

value. In a few seconds the display will stop, and meanwhile the calibrating

weight value will be shown, indicating that calibration is over. Normal weighing

can be started on. and the percentage of the state will increase from 0% to

100%, indicating that calibration is over. Normal weighing can be started on

First, take away the object from the platform. Then press

will display "CAL" and then press

key and "0.00"will show and then the calibrating weight value will be shown,

put the corresponding calibrating weight on the center of the platform

according to the shown weight value. In a few seconds, the display will stop,

and the percentage of the state will increase from 0% to1 00%, indicating that

calibration is over. Normal weighing can be started on.

6.4 Counting Function ( pcs )

Press

key to switch to "pcs", and the balance enters the counting state. If

you need resample for counting, please take away the object from the platform,

and press

key, the balance will display "0",then press

will display, "xxx" indicate the quantity value of samples, and press

change the quantity value , then put the same quantity sample on the platform

, then press

Normal counting and weighing can be started on.

NOTE: If the balance displays "no", that indicates the samples' weight is too

light

5 |

ANYLOAD ES-HB Precision Balance Product Manual (V1611)

key to confirm, when the reading value becomes stable,

to zero, and the balance will display

key, "0.00" will show and

key switch to "LINE", then press

key,

key, the balance

key, "PCS=xxx"

key to