- ページ 5

体重計 Anyload T15E-RのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Anyload T15E-R 12 ページ。 Pallet jack scale

4.3 RS232 Connection

RS232 connection with printer or computer applies only to T15E-R, T15C-R,

T15E-A, T15C-A indicator models:

1. Serial communication interface use RS232 plug with 9 cores.

2. All data are in ASCII codes. Every set is composed of 10 bits: the

3. Baud rates: 2400/4800/9600/19200

4. Communication Type: Command Mode

2- pin = Data output (TXD)

5- pin = Ground (GND)

Printer pin 1 connects with +5V

Printer pin 2 connects with GND

Printer pin 4 connects with TXD

Printer pin 5 connects with GND

1. Zero status indication. Will light on when the scale is at the centre of

its zero band.

2. Indication when battery charge is low

3. Tare status indication. Will light on when the weight has been tared.

4. Will light on when the scale is in Counting Mode

5. Will light on when the scale is set to lb unit of measurement

6. Will light on when the scale is set to kg unit of measurement

4 |

ANYLOAD NPS Series Pallet Jack Scale Operator's Guide (V1906) – T15E v2 series indicator

is the starting bit, the 10

is the stop bit.