- ページ 5

計測機器 Anyload DD-KC1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Anyload DD-KC1 11 ページ。 Digital weight indicator
Anyload DD-KC1 にも：操作マニュアル (13 ページ)

the weighing performance. If the weighing remains stable for longer than 2s,

the scale will finish "0.0kg"calibration automatically, it will then begin the next

calibration point; otherwise, "0.0kg" will keep flickering to wait for the scale to

the stablize.

f) Suppose that the next calibration point should be"xx.xkg"， the window will

display "Load"and"xx.xkg" alternately，which means that the weight"xx.xkg"

（WEIGHT） should be loaded on the platform. If you have to change this weight,

you can press

button to change the flashing position and press

the flashing position's number plus 1, and press

modification is finished;

g) After making sure the weight on the platform is"xx.xkg", press

confirm so that the scale begins the "xx.xkg"calibration. In the process of"xx.xkg"

calibration, "xx.xkg" flickers rapidly on the display window；keep the platform

calm, stable, and without other interference factors which will influence the

weighing performance. If the weighing remains stable for more than 2s, the

scale will finish "xx.xkg"calibration and save the calibrated parameters, then will

return to the weighing mode; otherwise, "xx.xkg"will keep flickering until the

scale stable.

4.4.2 Standard Two Point Weight Calibration

a) At weighing mode, press and hold

b) Press

c) Press

d) After the scale begins to calibrate, the window will display"Load"and"0.0kg"

alternately；

e) After you confirm that there is nothing on the platform, press

confirm and begin the zero calibration when the window displays"0.0kg". In the

process of zero calibration,"0.0kg"flickers rapidly on the display window； please

keep the platform calm, stable, and without other interference factors which will

influence the weighing performance. If the weighing keeps stable exceeding 2s,

the scale will finish zero calibration automatically, and then it will begin the next

Page 5 of 11

button cycle the display until the window displays"Line"；

button to begin calibration procedure；

button to enter the modify menu; then press

button until the window displays"------"；

Anyload-manual-indicator-DD-KC1-en-101

button to make

button to make sure the

button to