- ページ 3

コントロールユニット Duco iAVのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Duco iAV 16 ページ。 Casing
Duco iAV にも：クイックスタート (2 ページ)

01 Application

The iAV Control valve is an intelligent control valve that enables demand control to be set both centrally and zonally, in combination

with a pressure-controlled or non-pressure-controlled (roof) fan� This valve is therefore extremely suitable for ventilation projects

with collective exhaust, such as flats, student houses, studios�� as well as in utility construction (schools / offices / residential and

care centres)�

The iAV Control Valve is available with a built-in sensor (CO

01.A Master / Slave

One or more iAV Control Valves can be provided per zone� These can function as master (stand alone) or as slave (with external

control)� An iAV Control Valve can be paired with an IQ unit or another master iAV Control Valve�

To control multiple iAV Control Valves simultaneously with one or more actuators (= zone with multiple valves), iAV Control Valves

can be added as a wireless (RF) slave under a master iAV Control Valve� If an iAV is added as a slave , it can no longer be paired as a

wired component with an IQ unit�

01.B IQ unit

When using a pressure-controlled fan , the iAV Control Valve can operate independently� For a non-pressurised fan an IQ unit is

required that controls the fan with a PWM signal�

IQ unit must be provided, regardless of the fan type� Please refer to the manual of the IQ unit for more information�

01.C Possible configurations

Depending on your situation, there are a few possible configurations:

Configuration A: one iAV Control valve per zone without IQ unit

This configuration is especially suitable for residential applications and rooms with small flow rates, in combination with a pres-

sure-controlled fan� All valves operate automatically based on measurements in the iAV itself or from an external component such

as a Room sensor� The valves operate independently of each other�

PWM = Pulse width modulation = pulses are emitted at a fixed frequency to control actuators, among other things

or humidity) or without sensor�

� For systems to be paired with a building management system (via ModBus), an

Master

Slave

CENTRAL

EXTRACTION

ZONAL

EXTRACTION

L1020502 Quick start iAV control valve (Revision F | 25.10.2022)

ENGLISH