ページを印刷するedge of the windshield of the car during wiring.
Install the rear camera on the rear of the vehicle and pay
attention to the direction when installing. Wiring can be
laid along the roof of the vehicle. After the installation is
complete, connect the rear camera to the rear camera
interface of the recorder.
Adjust the lens position to ensure that the lens is level
with the ground.
Start the engine and check that the machine is installed
correctly.
【Dote】When the machine is installed correctly, the
system work indicator lights up; the machine starts to
enter the recording state, and the recording indicator
flashes. Please check if the picture on the display is
normal. If the display is inverted, please contact us in
time.
Function introduction
Advanced driver assistance system（ADAS）
1.Lane offset：
When the track offset (ADAS) is turned on, it runs on the
9