- ページ 2

トランシーバー AnyTone AT-D868UVのPDF ファームウェアアップデート手順をオンラインで閲覧またはダウンロードできます。AnyTone AT-D868UV 8 ページ。
AnyTone AT-D868UV にも：ファームウェアマニュアル (8 ページ)

Click Open Update File and find the update file you saved in the folder you

created. You will get a prompt that the file successfully opened. Click OK.

Make sure to put a check mark in the Duplex box.

Turn your radio off. Attach the programming cable to both the radio and the

computer. Press and hold both the PTT button and the orange PF3 button and

turn on the radio. The red LED light near the on/off switch will blink slowly. The

radio is now ready to accept the firmware.

You will need to choose the correct Com Port using the drop-down menu. The

number required is usually the one at the bottom of the list. Choose this number

and click Write. Follow all the prompts until you see that the firmware was

successfully installed.