- ページ 10

マイク AnyTone BT01のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AnyTone BT01 20 ページ。 Bluetooth microphone

BT01 microphone is able to access the radio menu and do

communications now.

» Once the BT pairing is done, the BT microphone will

automatically connect to AT-D578UV radio after reboot.

» In BT mode, the cross band repeater function is not available,

as the audio path is occupied by the BT function.

4.3- CABLE MODE connect to AT-D578UV

After select "CABLE MODE" on microphone, it will display "NO

DEVICE CONNECTED" when no radio is connected.

Use the 4m cable to connect the microphone to radio, AT-D578UV

displays "ALL DATA CHECKING", the display content of the AT-

D578UV radio will be mapped to the Bluetooth microphone.

AT-D578UV radio displays "EXTERNAL CABLE MODE" on the

screen, BT01 microphone is able to access the radio menu and do

communications now.

In Cable mode, the BT01 microphone is being charged when the

channel is free.

Press and hold the top [POW] button on microphone to turn off the

microphone.

» In CPS

set this function ON. AT-D578UV radio will be powered off/on

automatically when BT microphone is off/on.

In standby state, press the top [POW] button to switch the [CH-]/[CH+]

button for volume adjust use.

When screen shows "UpDn Key: Vol Set" , press [CH-] to reduce

the volume, press [CH+] to increase the volume.

The [VOL] or [CH] icon shows the current setting.

Optional Setting

BT shutdown RF, if you