- ページ 14

リピーター AnyTone AT600のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AnyTone AT600 18 ページ。 Mobile signal repeater
AnyTone AT600 にも：インストレーション・マニュアル (19 ページ)

- Secondly adjust the antennas' directions or locations or enlarge distance between them.

- Thirdly reduce the repeater's gain by ATT DIP if the above listed methods don't work.

The following measures can also be helpful:

- Use the roof of the building to enlarge isolation (Please try to place the outdoor antenna and indoor antenna on

different floors).

- Use some obstacles (Such as walls).

2. The repeater's power is on but the phone cannot get connected to the network and still can not communicate.

Reason 1: There are loose or wrong connections in the repeater system.

Solution: Please try to fasten the connections between different parts of the system.

Reason 2: The signals received by outdoor antenna of other operators nearby are too strong. (For example, the other

operators' signals are 10 dB stronger than the needed signals.)

Solution 1: Change the direction of the outdoor antenna or its installation position, so that the gap of signal strength

is reduced between operators.

Solution 2: Use barriers (like buildings and walls) to block signals from other operators.