- ページ 8
GPS Anytrek VT1501のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Anytrek VT1501 13 ページ。 Dash cam gps tracker
ページを印刷する6. Main Menu
The four buttons below the display screen of the dash cam provide control over all the functions of the dash cam.
This chapter goes through the various buttons, icons and functions.
6.1 Recording Screen
1
6
6.2 Standby Screen
1
2
6.4 Playback Screen
2
3
2
3
1) The device is recording
2) Flashing – the GPS module is acquiring its location
3) Microphone is active
4) Current video resolution
4
5) Recording screen
6) Current speed as derived by the GPS module
5
7) Current date and time
Operation:
Switch button – shows speed and heading. Hold for 3 seconds to go to playback screen.
Menu button – display full menu
7
Down – set file lock manually
Video button – go to Standby screen until movement is detected then the video will start
recording again.
1) Viewing screen
2) Date
3) Time
Operation:
Switch button – shows speed and heading. Hold for 3 seconds to go to playback screen.
Menu button – display full menu
Down – set file lock manually
Video button – go to Record screen
3
1
1) Video status – emergency recording and will not be overwritten
2) Video screen
3) Recorded date
4) Recorded time
5) Recording screen
6) Current speed as derived by the GPS module
7) Current date and time
Operation:
Switch button – shows speed and heading. Hold for 3 seconds to go to playback screen.
Menu button – display full menu
Down – cycle through all the video files stored on the SD card
Video button – pressing this button will play and pause the selected video
4
VT1501 User Manual
On – GPS module has synced with the GPS satellites
V1.03
8