- ページ 7
送信機 Anywave ATSC 25WのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Anywave ATSC 25W 13 ページ。 Dtv transmitter
ページを印刷する3 TX System Overview
Final assembly and test of each transmitter is performed at the Anywave factory.
The Exciter is setup on the desired channel frequency and the TX is tested with the
complete RF system (if purchased) at full power into a load. All TX operating
parameters are optimized. Linear and Nonlinear precorrection is performed and
automatically stored in non-volatile memory inside the Exciter. A Factory Test Report
is completed for each system, providing a record of full power operating parameters
and performance. The TX then goes through a final 24-hour burn-in period and check
out before being shut done and packed up for shipment.
In your shipment, you should receive a copy of the following documentation.
- Packing Checklist
- Transmitter Factory Test Report
- 25W TX Quick Start Guide
- 25W PA and Exciter User Manuals
Carefully unpack and inspect all your equipment and please review the Packing
Checklist when you receive your system to be certain you have received all your system
components. Also, please be sure to identify and remove all packing materials and
supports (foam pads, etc.) prior to initial turn on of the equipment.
All 25W TX systems ship with an AC power cord included with the Exciter and
PA.
ACT-25-QSG-DOC-V1.2, 09/29/2014
ATSC 25W TX Quick Start Guide
Page 7 of 13