- ページ 7

送信機 Anywave Marble PA-U-1200-D-FBのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Anywave Marble PA-U-1200-D-FB 18 ページ。

ページを印刷する
Anywave Marble PA-U-1200-D-FB クイック・スタート・マニュアル

3 TX System Interconnect

The Anywave PA-U-1200-D-FB Marble DTV Transmitter consists of an Exciter, a
PA-U-1200-D-FB (with built-in Controller), a 7/16 DIN Directional Coupler, a 7/16
DIN 90 degree elbow, a 7/16-to-1-5/8 adapter, a 1-5/8 LPF, a 1-5/8 90 degree elbow, a
30 inch section of 1-5/8 rigid coax (to eliminate potential moding with some mask
filters), a BPF (optional) with two additional single port 1-5/8 directional couplers for
Exciter feedback samples (optional), two 20 dB N-type attenuators (optional), and a
final 1-5/8 unflanged-to-flanged adapter. The diagram below shows the overall system
interconnect between the system components.
*** Caution *** Please connect the system as detailed in the diagram below. Failure to do so
may result in equipment damage and void the equipment limited warranty. Please contact
Anywave with any questions.
Before Filter 1-5/8 Coupler
with 20dB attenuator
1-5/8
30 in Coax section
Elbow
L
P
F
7/16 to
1-5/8
adapter
7/16 DIN
7/16
Directional
Elbow
Coupler
Mable 4Device Quick Start Guide, 5/19/2022
IN
Marble PA
PA-U-1200-D-FB
Marble 4Device Quick Start Guide
After Filter 1-5/8 Coupler
with 20dB attenuator
BPF
OUT
RS-232 to 485 Adapter
Front Panel LAN (RJ-45) port To PC for PA Remote Ctrl
IP:192.168.1.200; (login: Usr: anywavecom, Pass: anywavecom)
1-5/8
To Antenna feed
Flange adapter
TS Input
Exciter
To PC for EXC Remote Ctrl
(192.168.1.143) (anywavecom, anywavecom)
Page 7 of 18