- ページ 14
タッチターミナル Anywire AnyWireASLINK BL296PB-16F-4A-20のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Anywire AnyWireASLINK BL296PB-16F-4A-20 17 ページ。
ページを印刷する[Specifications]
■General speci cations
Operating ambient temperature/humidity
Storing ambient temperature/humidity
Vibration resistance
Shock resistance
Atmosphere
Operating altitude *
1
Pollution level *
2
*
1 Do not use or store AnyWireASLINK devices in an environment where the pressure exceeds
the atmospheric pressure at an altitude of 0 meters. Doing so may result in malfunction.
*
2 "Pollution level" is an index that indicates the degree of occurrence of conductive substances
in the environment where the device is used.
Pollution level 2 means the occurrence of only pollution by non-conductive substances.
In such an environment, however, electrical conduction could occur due to accidental
condensation.
■Transmission speci cations
Service power supply voltage
Transmission method
Synchronization method
Transmission procedure
Connection mode
Number of
connection points *
3
Number of connection units
RAS function
*
3 The number differs depending on the master unit. Be sure to refer to the manual of the
master unit for the number.
0 – +55°C, 10 – 90%RH No condensation
-25 – +75°C, 10 – 90%RH No condensation
Based on JIS B 3502 and IEC 61131-2
Based on JIS B 3502 and IEC 61131-2
No corrosive gas
0 – 2000m
2 or less
24V DC +15% to -10% (21.6 to 27.6V DC)
with a ripple of 0.5Vp-p or less
DC power supply superimposed
total frame/cyclic method
Frame/bit synchronization method
AnyWireASLINK protocol
Bus type (Multi-drop method, T-branch
method, Tree branch method)
Number of bit points: 512 points max.
(Input: 256 bits, Output: 256 bits)
Number of word points: 1024 words max.
(Input: 512 words, Output: 512 words)
Up to 128 units
Detection of transmission line disconnection,
transmission line short-circuit, transmission
power supply drop, and
duplicated/unregistered ID
-BL296*B16F*4A20 14/17-
■Individual speci cations
Number of
BL296SB-16F-4A-20
occupied
BL296XB-16F-4A-20
points
BL296PB-16F-4A-20
BL296SB-16FS-4A-20
BL296XB-16FS-4A-20
BL296PB-16FS-4A-20
Response time *
4
1ms max.
Detection
Slave unit voltage drop (DP-DN voltage drop)
function
I/O power supply drop (24V-0V voltage drop)
Current
consumption
BL296SB-16F-4A-20
BL296XB-16F-4A-20
BL296PB-16F-4A-20
BL296SB-16FS-4A-20
BL296XB-16FS-4A-20
BL296PB-16FS-4A-20
Weight
60g
*
4 Indicates the internal processing time of this unit. The maximum transmission delay time
is de ned as "this time + bit transmission cycle time × 2."
*
5 Current consumption for input is a value assumed when all IN-0V pins (NPN) or 24V-IN
pins (PNP) are short-circuited. To connect a 3-wire type sensor, add a total current
consumption of the sensor.
Current consumption for output is a value assumed when all points are turned ON. Add a
total current consumption of load being connected.
NPN bit input: 16 points
NPN bit input: 8 points/
bit output: 8 points
NPN bit output: 16 points
PNP bit input: 16 points
PNP bit input: 8 points/
bit output: 8 points
PNP bit output: 16 points
Transmission
I/O side *
5
side
(24V-0V)
(DP-DN)
8mA
80mA
8mA
50mA
8mA
15mA
8mA
80mA
8mA
50mA
8mA
15mA